Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Square feet to Square metres Converter
1 ft² = 0.09290304 m². Enter a value to convert ft² to m², then use the formula and table below. Displayed digits may be rounded.
AreaInstant result
Decimals
Formula result = input × 0.09290304 ÷ 1. 1 ft² ≈ 0.0929 m²
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Square metres0.0929 m²
Square kilometres9.29030e-8 km²
Square centimetres929.0304 cm²
Hectares9.29030e-6 ha
Acres2.29568e-5 ac
Square inches144 in²
Square miles3.58701e-8 mi²
Conversion table
| ft² | m² |
|---|---|
| 1 ft² | 0.0929 m² |
| 2 ft² | 0.1858 m² |
| 5 ft² | 0.4645 m² |
| 10 ft² | 0.929 m² |
| 25 ft² | 2.3226 m² |
| 50 ft² | 4.6452 m² |
| 100 ft² | 9.2903 m² |
Conversion chart
1 ft²0.0929 m²
5 ft²0.4645 m²
10 ft²0.929 m²
25 ft²2.3226 m²
50 ft²4.6452 m²
Worked example
1 ft² = 0.09290304 m². Apply the selected conversion formula to other input values.
Unit definition
Square feet (ft²) One square feet equals 0.09290304 square metre.
Unit history
Square feet is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert ft² to square metre.
3. Convert the base value to m² and apply your display precision.
Understand the result before using it
Square feet to Square metres converts a value measured in Square feet (ft²) into the equivalent value in Square metres (m²). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.09290304 ÷ 1
Assumptions
- Square feet and Square metres represent the same area quantity.
- The input is expressed in ft²; the output is expressed in m².
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 ft² = 0.09290304 m². For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a ft² measurement in a document that expects m².
- Compare a square feet value with a value reported in square metres.
- Check the ft² to m² arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not apply a linear length factor directly to area; the length factor must be squared.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Square feet to Square metres?
result = input × 0.09290304 ÷ 1. Input is in ft²; result is in m². 1 ft² = 0.09290304 m². The displayed digits may be rounded.
What is 1 ft² in m²?
1 ft² = 0.09290304 m². The displayed digits may be rounded.
Can I reverse the ft² to m² conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts m² back to ft².
Is the Square feet to Square metres result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.