Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Fraction to Parts per million Converter
1 fraction = 1,000,000 ppm. Enter a value to convert Fraction to ppm, then use the formula and table below. Displayed digits may be rounded.
Chemistry concentration unitsInstant result
Decimals
Formula result = input × 1 ÷ 0.000001. 1 = 1,000,000 ppm
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Percent100 %
Per mille1,000 ‰
Parts per million1,000,000 ppm
Parts per billion1,000,000,000 ppb
Conversion table
| ppm | |
|---|---|
| 1 | 1,000,000 ppm |
| 2 | 2,000,000 ppm |
| 5 | 5,000,000 ppm |
| 10 | 10,000,000 ppm |
| 25 | 25,000,000 ppm |
| 50 | 50,000,000 ppm |
| 100 | 100,000,000 ppm |
Conversion chart
1 1,000,000 ppm
5 5,000,000 ppm
10 10,000,000 ppm
25 25,000,000 ppm
50 50,000,000 ppm
Worked example
1 Fraction = 1,000,000 ppm. Apply the selected conversion formula to other input values.
Unit definition
Fraction () One fraction equals 1 fraction.
Unit history
Fraction is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert to fraction.
3. Convert the base value to ppm and apply your display precision.
Important
Mass/volume ppm equivalence depends on solution density.
Understand the result before using it
Fraction to Parts per million converts a value measured in Fraction () into the equivalent value in Parts per million (ppm). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.000001
Assumptions
- Fraction and Parts per million represent the same dilute-solution parts quantity.
- The input is expressed in fraction; the output is expressed in ppm.
- Mass/volume ppm equivalence depends on solution density.
Worked example
1 fraction = 1,000,000 ppm. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a fraction measurement in a document that expects ppm.
- Compare a fraction value with a value reported in parts per million.
- Check the fraction to ppm arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- A ppm value is not automatically a mass-per-volume value; the equivalence depends on density and how concentration is defined.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Fraction to Parts per million?
result = input × 1 ÷ 0.000001. Input is in fraction; result is in ppm. 1 fraction = 1,000,000 ppm. The displayed digits may be rounded.
What is 1 fraction in ppm?
1 fraction = 1,000,000 ppm. The displayed digits may be rounded.
Can I reverse the fraction to ppm conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts ppm back to fraction.
Is the Fraction to Parts per million result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.