Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Pounds per US gallon to Kilograms per litre Converter
1 lb/gal ≈ 0.1198264273 kg/L. Enter a value to convert lb/gal to kg/L, then use the formula and table below. Displayed digits may be rounded.
DensityInstant result
Decimals
Formula result = input × 119.8264273 ÷ 1000. 1 lb/gal ≈ 0.1198 kg/L
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Kilograms per cubic metre119.8264 kg/m³
Grams per cubic centimetre0.1198 g/cm³
Kilograms per litre0.1198 kg/L
Pounds per cubic foot7.4805 lb/ft³
Conversion table
| lb/gal | kg/L |
|---|---|
| 1 lb/gal | 0.1198 kg/L |
| 2 lb/gal | 0.2397 kg/L |
| 5 lb/gal | 0.5991 kg/L |
| 10 lb/gal | 1.1983 kg/L |
| 25 lb/gal | 2.9957 kg/L |
| 50 lb/gal | 5.9913 kg/L |
| 100 lb/gal | 11.9826 kg/L |
Conversion chart
1 lb/gal0.1198 kg/L
5 lb/gal0.5991 kg/L
10 lb/gal1.1983 kg/L
25 lb/gal2.9957 kg/L
50 lb/gal5.9913 kg/L
Worked example
1 lb/gal ≈ 0.1198264273 kg/L. Apply the selected conversion formula to other input values.
Unit definition
Pounds per US gallon (lb/gal) One pounds per us gallon equals 119.8264273 kilogram per cubic metre.
Unit history
Pounds per US gallon is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert lb/gal to kilogram per cubic metre.
3. Convert the base value to kg/L and apply your display precision.
Understand the result before using it
Pounds per US gallon to Kilograms per litre converts a value measured in Pounds per US gallon (lb/gal) into the equivalent value in Kilograms per litre (kg/L). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 119.8264273 ÷ 1000
Assumptions
- Pounds per US gallon and Kilograms per litre represent the same density quantity.
- The input is expressed in lb/gal; the output is expressed in kg/L.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 lb/gal ≈ 0.1198264273 kg/L. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a lb/gal measurement in a document that expects kg/L.
- Compare a pounds per us gallon value with a value reported in kilograms per litre.
- Check the lb/gal to kg/L arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- A material's density can change with temperature, pressure, composition, and moisture content.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Pounds per US gallon to Kilograms per litre?
result = input × 119.8264273 ÷ 1000. Input is in lb/gal; result is in kg/L. 1 lb/gal ≈ 0.1198264273 kg/L. The displayed digits may be rounded.
What is 1 lb/gal in kg/L?
1 lb/gal ≈ 0.1198264273 kg/L. The displayed digits may be rounded.
Can I reverse the lb/gal to kg/L conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts kg/L back to lb/gal.
Is the Pounds per US gallon to Kilograms per litre result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.