Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Nanofarads to Millifarads Converter
1 nF = 0.000001 mF. Enter a value to convert nF to mF, then use the formula and table below. Displayed digits may be rounded.
Electrical unitsInstant result
Decimals
Formula result = input × 1e-9 ÷ 0.001. 1 nF = 1.00000e-6 mF
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Farads1.00000e-9 F
Millifarads1.00000e-6 mF
Microfarads0.001 µF
Picofarads1,000 pF
Conversion table
| nF | mF |
|---|---|
| 1 nF | 1.00000e-6 mF |
| 2 nF | 2.00000e-6 mF |
| 5 nF | 5.00000e-6 mF |
| 10 nF | 1.00000e-5 mF |
| 25 nF | 2.50000e-5 mF |
| 50 nF | 0.0001 mF |
| 100 nF | 0.0001 mF |
Conversion chart
1 nF1.00000e-6 mF
5 nF5.00000e-6 mF
10 nF1.00000e-5 mF
25 nF2.50000e-5 mF
50 nF0.0001 mF
Worked example
1 nF = 0.000001 mF. Apply the selected conversion formula to other input values.
Unit definition
Nanofarads (nF) One nanofarads equals 0.000000001 farad.
Unit history
Nanofarads is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert nF to farad.
3. Convert the base value to mF and apply your display precision.
Understand the result before using it
Nanofarads to Millifarads converts a value measured in Nanofarads (nF) into the equivalent value in Millifarads (mF). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1e-9 ÷ 0.001
Assumptions
- Nanofarads and Millifarads represent the same capacitance quantity.
- The input is expressed in nF; the output is expressed in mF.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 nF = 0.000001 mF. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a nF measurement in a document that expects mF.
- Compare a nanofarads value with a value reported in millifarads.
- Check the nF to mF arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse nF with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Nanofarads to Millifarads?
result = input × 1e-9 ÷ 0.001. Input is in nF; result is in mF. 1 nF = 0.000001 mF. The displayed digits may be rounded.
What is 1 nF in mF?
1 nF = 0.000001 mF. The displayed digits may be rounded.
Can I reverse the nF to mF conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts mF back to nF.
Is the Nanofarads to Millifarads result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.