Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Ohms to Milliohms Converter
1 Ω = 1,000 mΩ. Enter a value to convert Ω to mΩ, then use the formula and table below. Displayed digits may be rounded.
Electrical unitsInstant result
Decimals
Formula result = input × 1 ÷ 0.001. 1 Ω = 1,000 mΩ
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Kiloohms0.001 kΩ
Megaohms1.00000e-6 MΩ
Milliohms1,000 mΩ
Conversion table
| Ω | mΩ |
|---|---|
| 1 Ω | 1,000 mΩ |
| 2 Ω | 2,000 mΩ |
| 5 Ω | 5,000 mΩ |
| 10 Ω | 10,000 mΩ |
| 25 Ω | 25,000 mΩ |
| 50 Ω | 50,000 mΩ |
| 100 Ω | 100,000 mΩ |
Conversion chart
1 Ω1,000 mΩ
5 Ω5,000 mΩ
10 Ω10,000 mΩ
25 Ω25,000 mΩ
50 Ω50,000 mΩ
Worked example
1 Ω = 1,000 mΩ. Apply the selected conversion formula to other input values.
Unit definition
Ohms (Ω) One ohms equals 1 ohm.
Unit history
Ohms is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert Ω to ohm.
3. Convert the base value to mΩ and apply your display precision.
Understand the result before using it
Ohms to Milliohms converts a value measured in Ohms (Ω) into the equivalent value in Milliohms (mΩ). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.001
Assumptions
- Ohms and Milliohms represent the same resistance quantity.
- The input is expressed in Ω; the output is expressed in mΩ.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 Ω = 1,000 mΩ. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a Ω measurement in a document that expects mΩ.
- Compare a ohms value with a value reported in milliohms.
- Check the Ω to mΩ arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse Ω with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Ohms to Milliohms?
result = input × 1 ÷ 0.001. Input is in Ω; result is in mΩ. 1 Ω = 1,000 mΩ. The displayed digits may be rounded.
What is 1 Ω in mΩ?
1 Ω = 1,000 mΩ. The displayed digits may be rounded.
Can I reverse the Ω to mΩ conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts mΩ back to Ω.
Is the Ohms to Milliohms result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.