Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Volts to Kilovolts Converter
1 V = 0.001 kV. Enter a value to convert V to kV, then use the formula and table below. Displayed digits may be rounded.
Electrical unitsInstant result
Decimals
Formula result = input × 1 ÷ 1000. 1 V = 0.001 kV
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Millivolts1,000 mV
Kilovolts0.001 kV
Microvolts1,000,000 µV
Conversion table
| V | kV |
|---|---|
| 1 V | 0.001 kV |
| 2 V | 0.002 kV |
| 5 V | 0.005 kV |
| 10 V | 0.01 kV |
| 25 V | 0.025 kV |
| 50 V | 0.05 kV |
| 100 V | 0.1 kV |
Conversion chart
1 V0.001 kV
5 V0.005 kV
10 V0.01 kV
25 V0.025 kV
50 V0.05 kV
Worked example
1 V = 0.001 kV. Apply the selected conversion formula to other input values.
Unit definition
Volts (V) One volts equals 1 volt.
Unit history
Volts is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert V to volt.
3. Convert the base value to kV and apply your display precision.
Understand the result before using it
Volts to Kilovolts converts a value measured in Volts (V) into the equivalent value in Kilovolts (kV). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 1000
Assumptions
- Volts and Kilovolts represent the same voltage quantity.
- The input is expressed in V; the output is expressed in kV.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 V = 0.001 kV. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a V measurement in a document that expects kV.
- Compare a volts value with a value reported in kilovolts.
- Check the V to kV arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse V with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Volts to Kilovolts?
result = input × 1 ÷ 1000. Input is in V; result is in kV. 1 V = 0.001 kV. The displayed digits may be rounded.
What is 1 V in kV?
1 V = 0.001 kV. The displayed digits may be rounded.
Can I reverse the V to kV conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts kV back to V.
Is the Volts to Kilovolts result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.