Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Watts to Megawatts Converter
1 W = 0.000001 MW. Enter a value to convert W to MW, then use the formula and table below. Displayed digits may be rounded.
Electrical unitsInstant result
Decimals
Formula result = input × 1 ÷ 1000000. 1 W = 1.00000e-6 MW
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Kilowatts0.001 kW
Megawatts1.00000e-6 MW
Decibel-milliwatts30 dBm
Conversion table
| W | MW |
|---|---|
| 1 W | 1.00000e-6 MW |
| 2 W | 2.00000e-6 MW |
| 5 W | 5.00000e-6 MW |
| 10 W | 1.00000e-5 MW |
| 25 W | 2.50000e-5 MW |
| 50 W | 0.0001 MW |
| 100 W | 0.0001 MW |
Conversion chart
1 W1.00000e-6 MW
5 W5.00000e-6 MW
10 W1.00000e-5 MW
25 W2.50000e-5 MW
50 W0.0001 MW
Worked example
1 W = 0.000001 MW. Apply the selected conversion formula to other input values.
Unit definition
Watts (W) One watts equals 1 watt.
Unit history
The watt is named for James Watt and is the SI unit of power, equal to one joule per second.
Step by step
1. Parse the value, including fractions.
2. Convert W to watt.
3. Convert the base value to MW and apply your display precision.
Understand the result before using it
Watts to Megawatts converts a value measured in Watts (W) into the equivalent value in Megawatts (MW). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 1000000
Assumptions
- Watts and Megawatts represent the same electrical power quantity.
- The input is expressed in W; the output is expressed in MW.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 W = 0.000001 MW. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a W measurement in a document that expects MW.
- Compare a watts value with a value reported in megawatts.
- Check the W to MW arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse W with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Watts to Megawatts?
result = input × 1 ÷ 1000000. Input is in W; result is in MW. 1 W = 0.000001 MW. The displayed digits may be rounded.
What is 1 W in MW?
1 W = 0.000001 MW. The displayed digits may be rounded.
Can I reverse the W to MW conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts MW back to W.
Is the Watts to Megawatts result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.