Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Kilohertz to Gigahertz Converter
1 kHz = 0.000001 GHz. Enter a value to convert kHz to GHz, then use the formula and table below. Displayed digits may be rounded.
FrequencyInstant result
Decimals
Formula result = input × 1000 ÷ 1000000000. 1 kHz = 1.00000e-6 GHz
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Hertz1,000 Hz
Megahertz0.001 MHz
Gigahertz1.00000e-6 GHz
Revolutions per minute60,000 rpm
Conversion table
| kHz | GHz |
|---|---|
| 1 kHz | 1.00000e-6 GHz |
| 2 kHz | 2.00000e-6 GHz |
| 5 kHz | 5.00000e-6 GHz |
| 10 kHz | 1.00000e-5 GHz |
| 25 kHz | 2.50000e-5 GHz |
| 50 kHz | 0.0001 GHz |
| 100 kHz | 0.0001 GHz |
Conversion chart
1 kHz1.00000e-6 GHz
5 kHz5.00000e-6 GHz
10 kHz1.00000e-5 GHz
25 kHz2.50000e-5 GHz
50 kHz0.0001 GHz
Worked example
1 kHz = 0.000001 GHz. Apply the selected conversion formula to other input values.
Unit definition
Kilohertz (kHz) One kilohertz equals 1,000 hertz.
Unit history
Kilohertz is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert kHz to hertz.
3. Convert the base value to GHz and apply your display precision.
Understand the result before using it
Kilohertz to Gigahertz converts a value measured in Kilohertz (kHz) into the equivalent value in Gigahertz (GHz). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1000 ÷ 1000000000
Assumptions
- Kilohertz and Gigahertz represent the same frequency quantity.
- The input is expressed in kHz; the output is expressed in GHz.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 kHz = 0.000001 GHz. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a kHz measurement in a document that expects GHz.
- Compare a kilohertz value with a value reported in gigahertz.
- Check the kHz to GHz arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse kHz with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Kilohertz to Gigahertz?
result = input × 1000 ÷ 1000000000. Input is in kHz; result is in GHz. 1 kHz = 0.000001 GHz. The displayed digits may be rounded.
What is 1 kHz in GHz?
1 kHz = 0.000001 GHz. The displayed digits may be rounded.
Can I reverse the kHz to GHz conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts GHz back to kHz.
Is the Kilohertz to Gigahertz result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.