Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Feet to Yards Converter
1 ft ≈ 0.333333333333 yd. Enter a value to convert ft to yd, then use the formula and table below. Displayed digits may be rounded.
Length & distanceInstant result
Decimals
Formula result = input × 0.3048 ÷ 0.9144. 1 ft ≈ 0.3333 yd
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Metres0.3048 m
Kilometres0.0003 km
Centimetres30.48 cm
Millimetres304.8 mm
Miles0.0002 mi
Yards0.3333 yd
Inches12 in
Nautical miles0.0002 nmi
Conversion table
| ft | yd |
|---|---|
| 1 ft | 0.3333 yd |
| 2 ft | 0.6667 yd |
| 5 ft | 1.6667 yd |
| 10 ft | 3.3333 yd |
| 25 ft | 8.3333 yd |
| 50 ft | 16.6667 yd |
| 100 ft | 33.3333 yd |
Conversion chart
1 ft0.3333 yd
5 ft1.6667 yd
10 ft3.3333 yd
25 ft8.3333 yd
50 ft16.6667 yd
Worked example
1 ft ≈ 0.333333333333 yd. Apply the selected conversion formula to other input values.
Unit definition
Feet (ft) One feet equals 0.3048 metre.
Unit history
The international foot was standardized in 1959 as exactly 0.3048 metre.
Step by step
1. Parse the value, including fractions.
2. Convert ft to metre.
3. Convert the base value to yd and apply your display precision.
Understand the result before using it
Feet to Yards converts a value measured in Feet (ft) into the equivalent value in Yards (yd). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.3048 ÷ 0.9144
Assumptions
- Feet and Yards represent the same length & distance quantity.
- The input is expressed in ft; the output is expressed in yd.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 ft ≈ 0.333333333333 yd. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a ft measurement in a document that expects yd.
- Compare a feet value with a value reported in yards.
- Check the ft to yd arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse ft with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Feet to Yards?
result = input × 0.3048 ÷ 0.9144. Input is in ft; result is in yd. 1 ft ≈ 0.333333333333 yd. The displayed digits may be rounded.
What is 1 ft in yd?
1 ft ≈ 0.333333333333 yd. The displayed digits may be rounded.
Can I reverse the ft to yd conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts yd back to ft.
Is the Feet to Yards result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.