Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Kilometres to Metres Converter
1 km = 1,000 m. Enter a value to convert km to m, then use the formula and table below. Displayed digits may be rounded.
Length & distanceInstant result
Decimals
Formula result = input × 1000 ÷ 1. 1 km = 1,000 m
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Metres1,000 m
Centimetres100,000 cm
Millimetres1,000,000 mm
Miles0.6214 mi
Yards1,093.6133 yd
Feet3,280.8399 ft
Inches39,370.0787 in
Nautical miles0.54 nmi
Conversion table
| km | m |
|---|---|
| 1 km | 1,000 m |
| 2 km | 2,000 m |
| 5 km | 5,000 m |
| 10 km | 10,000 m |
| 25 km | 25,000 m |
| 50 km | 50,000 m |
| 100 km | 100,000 m |
Conversion chart
1 km1,000 m
5 km5,000 m
10 km10,000 m
25 km25,000 m
50 km50,000 m
Worked example
1 km = 1,000 m. Apply the selected conversion formula to other input values.
Unit definition
Kilometres (km) One kilometres equals 1,000 metre.
Unit history
Kilometres is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert km to metre.
3. Convert the base value to m and apply your display precision.
Understand the result before using it
Kilometres to Metres converts a value measured in Kilometres (km) into the equivalent value in Metres (m). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1000 ÷ 1
Assumptions
- Kilometres and Metres represent the same length & distance quantity.
- The input is expressed in km; the output is expressed in m.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 km = 1,000 m. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a km measurement in a document that expects m.
- Compare a kilometres value with a value reported in metres.
- Check the km to m arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse km with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Kilometres to Metres?
result = input × 1000 ÷ 1. Input is in km; result is in m. 1 km = 1,000 m. The displayed digits may be rounded.
What is 1 km in m?
1 km = 1,000 m. The displayed digits may be rounded.
Can I reverse the km to m conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts m back to km.
Is the Kilometres to Metres result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.