Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Pounds per square inch to Megapascals Converter
1 psi = 0.006894757293 MPa. Enter a value to convert psi to MPa, then use the formula and table below. Displayed digits may be rounded.
Pressure & stressInstant result
Decimals
Formula result = input × 6894.757293 ÷ 1000000. 1 psi ≈ 0.0069 MPa
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Pascals6,894.7573 Pa
Kilopascals6.8948 kPa
Megapascals0.0069 MPa
Bar0.0689 bar
Atmospheres0.068 atm
Millimetres of mercury51.7149 mmHg
Conversion table
| psi | MPa |
|---|---|
| 1 psi | 0.0069 MPa |
| 2 psi | 0.0138 MPa |
| 5 psi | 0.0345 MPa |
| 10 psi | 0.0689 MPa |
| 25 psi | 0.1724 MPa |
| 50 psi | 0.3447 MPa |
| 100 psi | 0.6895 MPa |
Conversion chart
1 psi0.0069 MPa
5 psi0.0345 MPa
10 psi0.0689 MPa
25 psi0.1724 MPa
50 psi0.3447 MPa
Worked example
1 psi = 0.006894757293 MPa. Apply the selected conversion formula to other input values.
Unit definition
Pounds per square inch (psi) One pounds per square inch equals 6,894.757293 pascal.
Unit history
Pounds per square inch is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert psi to pascal.
3. Convert the base value to MPa and apply your display precision.
Understand the result before using it
Pounds per square inch to Megapascals converts a value measured in Pounds per square inch (psi) into the equivalent value in Megapascals (MPa). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 6894.757293 ÷ 1000000
Assumptions
- Pounds per square inch and Megapascals represent the same pressure & stress quantity.
- The input is expressed in psi; the output is expressed in MPa.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 psi = 0.006894757293 MPa. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a psi measurement in a document that expects MPa.
- Compare a pounds per square inch value with a value reported in megapascals.
- Check the psi to MPa arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse psi with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Pounds per square inch to Megapascals?
result = input × 6894.757293 ÷ 1000000. Input is in psi; result is in MPa. 1 psi = 0.006894757293 MPa. The displayed digits may be rounded.
What is 1 psi in MPa?
1 psi = 0.006894757293 MPa. The displayed digits may be rounded.
Can I reverse the psi to MPa conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts MPa back to psi.
Is the Pounds per square inch to Megapascals result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.