Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Milligray to Rad Converter
1 mGy = 0.1 rad. Enter a value to convert mGy to rad, then use the formula and table below. Displayed digits may be rounded.
Radiation unitsInstant result
Decimals
Formula result = input × 0.001 ÷ 0.01. 1 mGy = 0.1 rad
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Gray0.001 Gy
Rad0.1 rad
Joules per kilogram0.001 J/kg
Conversion table
| mGy | rad |
|---|---|
| 1 mGy | 0.1 rad |
| 2 mGy | 0.2 rad |
| 5 mGy | 0.5 rad |
| 10 mGy | 1 rad |
| 25 mGy | 2.5 rad |
| 50 mGy | 5 rad |
| 100 mGy | 10 rad |
Conversion chart
1 mGy0.1 rad
5 mGy0.5 rad
10 mGy1 rad
25 mGy2.5 rad
50 mGy5 rad
Worked example
1 mGy = 0.1 rad. Apply the selected conversion formula to other input values.
Unit definition
Milligray (mGy) One milligray equals 0.001 gray.
Unit history
Milligray is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert mGy to gray.
3. Convert the base value to rad and apply your display precision.
Understand the result before using it
Milligray to Rad converts a value measured in Milligray (mGy) into the equivalent value in Rad (rad). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.001 ÷ 0.01
Assumptions
- Milligray and Rad represent the same absorbed dose quantity.
- The input is expressed in mGy; the output is expressed in rad.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 mGy = 0.1 rad. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a mGy measurement in a document that expects rad.
- Compare a milligray value with a value reported in rad.
- Check the mGy to rad arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Absorbed dose, equivalent dose, and activity describe different radiation quantities and are not interchangeable.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Milligray to Rad?
result = input × 0.001 ÷ 0.01. Input is in mGy; result is in rad. 1 mGy = 0.1 rad. The displayed digits may be rounded.
What is 1 mGy in rad?
1 mGy = 0.1 rad. The displayed digits may be rounded.
Can I reverse the mGy to rad conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts rad back to mGy.
Is the Milligray to Rad result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.