Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Rem to Microsieverts Converter
1 rem = 10,000 µSv. Enter a value to convert rem to µSv, then use the formula and table below. Displayed digits may be rounded.
Radiation unitsInstant result
Decimals
Formula result = input × 0.01 ÷ 0.000001. 1 rem = 10,000 µSv
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Sieverts0.01 Sv
Millisieverts10 mSv
Microsieverts10,000 µSv
Conversion table
| rem | µSv |
|---|---|
| 1 rem | 10,000 µSv |
| 2 rem | 20,000 µSv |
| 5 rem | 50,000 µSv |
| 10 rem | 100,000 µSv |
| 25 rem | 250,000 µSv |
| 50 rem | 500,000 µSv |
| 100 rem | 1,000,000 µSv |
Conversion chart
1 rem10,000 µSv
5 rem50,000 µSv
10 rem100,000 µSv
25 rem250,000 µSv
50 rem500,000 µSv
Worked example
1 rem = 10,000 µSv. Apply the selected conversion formula to other input values.
Unit definition
Rem (rem) One rem equals 0.01 sievert.
Unit history
Rem is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert rem to sievert.
3. Convert the base value to µSv and apply your display precision.
Important
Equivalent dose already includes the applicable radiation weighting factor.
Understand the result before using it
Rem to Microsieverts converts a value measured in Rem (rem) into the equivalent value in Microsieverts (µSv). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.01 ÷ 0.000001
Assumptions
- Rem and Microsieverts represent the same equivalent dose quantity.
- The input is expressed in rem; the output is expressed in µSv.
- Equivalent dose already includes the applicable radiation weighting factor.
Worked example
1 rem = 10,000 µSv. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a rem measurement in a document that expects µSv.
- Compare a rem value with a value reported in microsieverts.
- Check the rem to µSv arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Absorbed dose, equivalent dose, and activity describe different radiation quantities and are not interchangeable.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Rem to Microsieverts?
result = input × 0.01 ÷ 0.000001. Input is in rem; result is in µSv. 1 rem = 10,000 µSv. The displayed digits may be rounded.
What is 1 rem in µSv?
1 rem = 10,000 µSv. The displayed digits may be rounded.
Can I reverse the rem to µSv conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts µSv back to rem.
Is the Rem to Microsieverts result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.