Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Microsieverts to Rem Converter
1 µSv ≈ 0.0001 rem. Enter a value to convert µSv to rem, then use the formula and table below. Displayed digits may be rounded.
Radiation unitsInstant result
Decimals
Formula result = input × 0.000001 ÷ 0.01. 1 µSv ≈ 0.0001 rem
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Sieverts1.00000e-6 Sv
Millisieverts0.001 mSv
Rem0.0001 rem
Conversion table
| µSv | rem |
|---|---|
| 1 µSv | 0.0001 rem |
| 2 µSv | 0.0002 rem |
| 5 µSv | 0.0005 rem |
| 10 µSv | 0.001 rem |
| 25 µSv | 0.0025 rem |
| 50 µSv | 0.005 rem |
| 100 µSv | 0.01 rem |
Conversion chart
1 µSv0.0001 rem
5 µSv0.0005 rem
10 µSv0.001 rem
25 µSv0.0025 rem
50 µSv0.005 rem
Worked example
1 µSv ≈ 0.0001 rem. Apply the selected conversion formula to other input values.
Unit definition
Microsieverts (µSv) One microsieverts equals 0.000001 sievert.
Unit history
Microsieverts is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert µSv to sievert.
3. Convert the base value to rem and apply your display precision.
Important
Equivalent dose already includes the applicable radiation weighting factor.
Understand the result before using it
Microsieverts to Rem converts a value measured in Microsieverts (µSv) into the equivalent value in Rem (rem). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.000001 ÷ 0.01
Assumptions
- Microsieverts and Rem represent the same equivalent dose quantity.
- The input is expressed in µSv; the output is expressed in rem.
- Equivalent dose already includes the applicable radiation weighting factor.
Worked example
1 µSv ≈ 0.0001 rem. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a µSv measurement in a document that expects rem.
- Compare a microsieverts value with a value reported in rem.
- Check the µSv to rem arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Absorbed dose, equivalent dose, and activity describe different radiation quantities and are not interchangeable.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Microsieverts to Rem?
result = input × 0.000001 ÷ 0.01. Input is in µSv; result is in rem. 1 µSv ≈ 0.0001 rem. The displayed digits may be rounded.
What is 1 µSv in rem?
1 µSv ≈ 0.0001 rem. The displayed digits may be rounded.
Can I reverse the µSv to rem conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts rem back to µSv.
Is the Microsieverts to Rem result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.