Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Miles per hour to Metres per second Converter
1 mph = 0.44704 m/s. Enter a value to convert mph to m/s, then use the formula and table below. Displayed digits may be rounded.
Speed & accelerationInstant result
Decimals
Formula result = input × 0.44704 ÷ 1. 1 mph ≈ 0.447 m/s
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Metres per second0.447 m/s
Kilometres per hour1.6093 km/h
Knots0.869 kn
Feet per second1.4667 ft/s
Mach (standard atmosphere)0.0013 Ma
Conversion table
| mph | m/s |
|---|---|
| 1 mph | 0.447 m/s |
| 2 mph | 0.8941 m/s |
| 5 mph | 2.2352 m/s |
| 10 mph | 4.4704 m/s |
| 25 mph | 11.176 m/s |
| 50 mph | 22.352 m/s |
| 100 mph | 44.704 m/s |
Conversion chart
1 mph0.447 m/s
5 mph2.2352 m/s
10 mph4.4704 m/s
25 mph11.176 m/s
50 mph22.352 m/s
Worked example
1 mph = 0.44704 m/s. Apply the selected conversion formula to other input values.
Unit definition
Miles per hour (mph) One miles per hour equals 0.44704 metre per second.
Unit history
Miles per hour is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert mph to metre per second.
3. Convert the base value to m/s and apply your display precision.
Important
Mach uses 343 m/s, a representative dry-air value near 20 °C.
Understand the result before using it
Miles per hour to Metres per second converts a value measured in Miles per hour (mph) into the equivalent value in Metres per second (m/s). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.44704 ÷ 1
Assumptions
- Miles per hour and Metres per second represent the same speed quantity.
- The input is expressed in mph; the output is expressed in m/s.
- Mach uses 343 m/s, a representative dry-air value near 20 °C.
Worked example
1 mph = 0.44704 m/s. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a mph measurement in a document that expects m/s.
- Compare a miles per hour value with a value reported in metres per second.
- Check the mph to m/s arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Mach varies with the local speed of sound; this tool uses the representative condition stated beside the converter.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Miles per hour to Metres per second?
result = input × 0.44704 ÷ 1. Input is in mph; result is in m/s. 1 mph = 0.44704 m/s. The displayed digits may be rounded.
What is 1 mph in m/s?
1 mph = 0.44704 m/s. The displayed digits may be rounded.
Can I reverse the mph to m/s conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts m/s back to mph.
Is the Miles per hour to Metres per second result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.