Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Metres per second to Kilometres per hour Converter
1 m/s ≈ 3.6 km/h. Enter a value to convert m/s to km/h, then use the formula and table below. Displayed digits may be rounded.
Speed & accelerationInstant result
Decimals
Formula result = input × 1 ÷ 0.2777777777777778. 1 m/s ≈ 3.6 km/h
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Kilometres per hour3.6 km/h
Miles per hour2.2369 mph
Knots1.9438 kn
Feet per second3.2808 ft/s
Mach (standard atmosphere)0.0029 Ma
Conversion table
| m/s | km/h |
|---|---|
| 1 m/s | 3.6 km/h |
| 2 m/s | 7.2 km/h |
| 5 m/s | 18 km/h |
| 10 m/s | 36 km/h |
| 25 m/s | 90 km/h |
| 50 m/s | 180 km/h |
| 100 m/s | 360 km/h |
Conversion chart
1 m/s3.6 km/h
5 m/s18 km/h
10 m/s36 km/h
25 m/s90 km/h
50 m/s180 km/h
Worked example
1 m/s ≈ 3.6 km/h. Apply the selected conversion formula to other input values.
Unit definition
Metres per second (m/s) One metres per second equals 1 metre per second.
Unit history
Metres per second is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert m/s to metre per second.
3. Convert the base value to km/h and apply your display precision.
Important
Mach uses 343 m/s, a representative dry-air value near 20 °C.
Understand the result before using it
Metres per second to Kilometres per hour converts a value measured in Metres per second (m/s) into the equivalent value in Kilometres per hour (km/h). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.2777777777777778
Assumptions
- Metres per second and Kilometres per hour represent the same speed quantity.
- The input is expressed in m/s; the output is expressed in km/h.
- Mach uses 343 m/s, a representative dry-air value near 20 °C.
Worked example
1 m/s ≈ 3.6 km/h. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a m/s measurement in a document that expects km/h.
- Compare a metres per second value with a value reported in kilometres per hour.
- Check the m/s to km/h arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Mach varies with the local speed of sound; this tool uses the representative condition stated beside the converter.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Metres per second to Kilometres per hour?
result = input × 1 ÷ 0.2777777777777778. Input is in m/s; result is in km/h. 1 m/s ≈ 3.6 km/h. The displayed digits may be rounded.
What is 1 m/s in km/h?
1 m/s ≈ 3.6 km/h. The displayed digits may be rounded.
Can I reverse the m/s to km/h conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts km/h back to m/s.
Is the Metres per second to Kilometres per hour result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.