Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Milliseconds to Minutes Converter
1 ms ≈ 0.0000166666666667 min. Enter a value to convert ms to min, then use the formula and table below. Displayed digits may be rounded.
TimeInstant result
Decimals
Formula result = input × 0.001 ÷ 60. 1 ms ≈ 1.66667e-5 min
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Seconds0.001 s
Minutes1.66667e-5 min
Hours2.77778e-7 h
Days1.15741e-8 d
Weeks1.65344e-9 wk
Years (365.2425 days)3.16887e-11 yr
Conversion table
| ms | min |
|---|---|
| 1 ms | 1.66667e-5 min |
| 2 ms | 3.33333e-5 min |
| 5 ms | 0.0001 min |
| 10 ms | 0.0002 min |
| 25 ms | 0.0004 min |
| 50 ms | 0.0008 min |
| 100 ms | 0.0017 min |
Conversion chart
1 ms1.66667e-5 min
5 ms0.0001 min
10 ms0.0002 min
25 ms0.0004 min
50 ms0.0008 min
Worked example
1 ms ≈ 0.0000166666666667 min. Apply the selected conversion formula to other input values.
Unit definition
Milliseconds (ms) One milliseconds equals 0.001 second.
Unit history
Milliseconds is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert ms to second.
3. Convert the base value to min and apply your display precision.
Understand the result before using it
Milliseconds to Minutes converts a value measured in Milliseconds (ms) into the equivalent value in Minutes (min). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.001 ÷ 60
Assumptions
- Milliseconds and Minutes represent the same time quantity.
- The input is expressed in ms; the output is expressed in min.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 ms ≈ 0.0000166666666667 min. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a ms measurement in a document that expects min.
- Compare a milliseconds value with a value reported in minutes.
- Check the ms to min arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- A converter year is a defined average duration; calendar years and months do not all contain the same number of days.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Milliseconds to Minutes?
result = input × 0.001 ÷ 60. Input is in ms; result is in min. 1 ms ≈ 0.0000166666666667 min. The displayed digits may be rounded.
What is 1 ms in min?
1 ms ≈ 0.0000166666666667 min. The displayed digits may be rounded.
Can I reverse the ms to min conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts min back to ms.
Is the Milliseconds to Minutes result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.