Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Centipoise to Pascal-seconds Converter
1 cP = 0.001 Pa·s. Enter a value to convert cP to Pa·s, then use the formula and table below. Displayed digits may be rounded.
ViscosityInstant result
Decimals
Formula result = input × 0.001 ÷ 1. 1 cP = 0.001 Pa·s
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Pascal-seconds0.001 Pa·s
Millipascal-seconds1 mPa·s
Poise0.01 P
Conversion table
| cP | Pa·s |
|---|---|
| 1 cP | 0.001 Pa·s |
| 2 cP | 0.002 Pa·s |
| 5 cP | 0.005 Pa·s |
| 10 cP | 0.01 Pa·s |
| 25 cP | 0.025 Pa·s |
| 50 cP | 0.05 Pa·s |
| 100 cP | 0.1 Pa·s |
Conversion chart
1 cP0.001 Pa·s
5 cP0.005 Pa·s
10 cP0.01 Pa·s
25 cP0.025 Pa·s
50 cP0.05 Pa·s
Worked example
1 cP = 0.001 Pa·s. Apply the selected conversion formula to other input values.
Unit definition
Centipoise (cP) One centipoise equals 0.001 pascal-second.
Unit history
Centipoise is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert cP to pascal-second.
3. Convert the base value to Pa·s and apply your display precision.
Understand the result before using it
Centipoise to Pascal-seconds converts a value measured in Centipoise (cP) into the equivalent value in Pascal-seconds (Pa·s). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.001 ÷ 1
Assumptions
- Centipoise and Pascal-seconds represent the same dynamic viscosity quantity.
- The input is expressed in cP; the output is expressed in Pa·s.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 cP = 0.001 Pa·s. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a cP measurement in a document that expects Pa·s.
- Compare a centipoise value with a value reported in pascal-seconds.
- Check the cP to Pa·s arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Dynamic and kinematic viscosity are different quantities and require density to convert between each other.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Centipoise to Pascal-seconds?
result = input × 0.001 ÷ 1. Input is in cP; result is in Pa·s. 1 cP = 0.001 Pa·s. The displayed digits may be rounded.
What is 1 cP in Pa·s?
1 cP = 0.001 Pa·s. The displayed digits may be rounded.
Can I reverse the cP to Pa·s conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts Pa·s back to cP.
Is the Centipoise to Pascal-seconds result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.