Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Litres to Imperial gallons Converter
1 L ≈ 0.219969248299 imp gal. Enter a value to convert L to imp gal, then use the formula and table below. Displayed digits may be rounded.
VolumeInstant result
Decimals
Formula result = input × 1 ÷ 4.54609. 1 L ≈ 0.22 imp gal
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Millilitres1,000 mL
Cubic metres0.001 m³
Cubic centimetres1,000 cm³
US gallons0.2642 US gal
Imperial gallons0.22 imp gal
US quarts1.0567 qt
US cups4.2268 cup
US fluid ounces33.814 fl oz
Conversion table
| L | imp gal |
|---|---|
| 1 L | 0.22 imp gal |
| 2 L | 0.4399 imp gal |
| 5 L | 1.0998 imp gal |
| 10 L | 2.1997 imp gal |
| 25 L | 5.4992 imp gal |
| 50 L | 10.9985 imp gal |
| 100 L | 21.9969 imp gal |
Conversion chart
1 L0.22 imp gal
5 L1.0998 imp gal
10 L2.1997 imp gal
25 L5.4992 imp gal
50 L10.9985 imp gal
Worked example
1 L ≈ 0.219969248299 imp gal. Apply the selected conversion formula to other input values.
Unit definition
Litres (L) One litres equals 1 litre.
Unit history
Litres is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert L to litre.
3. Convert the base value to imp gal and apply your display precision.
Understand the result before using it
Litres to Imperial gallons converts a value measured in Litres (L) into the equivalent value in Imperial gallons (imp gal). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 4.54609
Assumptions
- Litres and Imperial gallons represent the same volume quantity.
- The input is expressed in L; the output is expressed in imp gal.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 L ≈ 0.219969248299 imp gal. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a L measurement in a document that expects imp gal.
- Compare a litres value with a value reported in imperial gallons.
- Check the L to imp gal arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- US gallons and imperial gallons are different units; select the one your source actually uses.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Litres to Imperial gallons?
result = input × 1 ÷ 4.54609. Input is in L; result is in imp gal. 1 L ≈ 0.219969248299 imp gal. The displayed digits may be rounded.
What is 1 L in imp gal?
1 L ≈ 0.219969248299 imp gal. The displayed digits may be rounded.
Can I reverse the L to imp gal conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts imp gal back to L.
Is the Litres to Imperial gallons result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.