Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Ounces to Metric tonnes Converter
1 oz ≈ 0.000028349523125 t. Enter a value to convert oz to t, then use the formula and table below. Displayed digits may be rounded.
Weight & massInstant result
Decimals
Formula result = input × 0.028349523125 ÷ 1000. 1 oz ≈ 2.83495e-5 t
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Kilograms0.0283 kg
Grams28.3495 g
Milligrams28,349.5231 mg
Metric tonnes2.83495e-5 t
Pounds0.0625 lb
Stone0.0045 st
Conversion table
| oz | t |
|---|---|
| 1 oz | 2.83495e-5 t |
| 2 oz | 0.0001 t |
| 5 oz | 0.0001 t |
| 10 oz | 0.0003 t |
| 25 oz | 0.0007 t |
| 50 oz | 0.0014 t |
| 100 oz | 0.0028 t |
Conversion chart
1 oz2.83495e-5 t
5 oz0.0001 t
10 oz0.0003 t
25 oz0.0007 t
50 oz0.0014 t
Worked example
1 oz ≈ 0.000028349523125 t. Apply the selected conversion formula to other input values.
Unit definition
Ounces (oz) One ounces equals 0.028349523125 kilogram.
Unit history
Ounces is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert oz to kilogram.
3. Convert the base value to t and apply your display precision.
Understand the result before using it
Ounces to Metric tonnes converts a value measured in Ounces (oz) into the equivalent value in Metric tonnes (t). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.028349523125 ÷ 1000
Assumptions
- Ounces and Metric tonnes represent the same weight & mass quantity.
- The input is expressed in oz; the output is expressed in t.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 oz ≈ 0.000028349523125 t. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a oz measurement in a document that expects t.
- Compare a ounces value with a value reported in metric tonnes.
- Check the oz to t arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Everyday language often says weight, but these units represent mass. Force requires a local gravitational acceleration.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Ounces to Metric tonnes?
result = input × 0.028349523125 ÷ 1000. Input is in oz; result is in t. 1 oz ≈ 0.000028349523125 t. The displayed digits may be rounded.
What is 1 oz in t?
1 oz ≈ 0.000028349523125 t. The displayed digits may be rounded.
Can I reverse the oz to t conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts t back to oz.
Is the Ounces to Metric tonnes result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.