Authoritative definitions of the International System of Units and SI prefixes.
Unit conversion
Nanofarads to Microfarads Converter
1 nF = 0.001 µF. Enter a value to convert nF to µF, then use the formula and table below. Displayed digits may be rounded.
Electrical unitsInstant result
Decimals
Formula result = input × 1e-9 ÷ 0.000001. 1 nF = 0.001 µF
Nonzero results too small for the selected decimal places use scientific notation.
Nonzero results too small for the selected decimal places use scientific notation.
Common examples
One value, several units
Farads1.00000e-9 F
Millifarads1.00000e-6 mF
Microfarads0.001 µF
Picofarads1,000 pF
Conversion table
| nF | µF |
|---|---|
| 1 nF | 0.001 µF |
| 2 nF | 0.002 µF |
| 5 nF | 0.005 µF |
| 10 nF | 0.01 µF |
| 25 nF | 0.025 µF |
| 50 nF | 0.05 µF |
| 100 nF | 0.1 µF |
Conversion chart
1 nF0.001 µF
5 nF0.005 µF
10 nF0.01 µF
25 nF0.025 µF
50 nF0.05 µF
Worked example
1 nF = 0.001 µF. Apply the selected conversion formula to other input values.
Unit definition
Nanofarads (nF) One nanofarads equals 0.000000001 farad.
Unit history
Nanofarads is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert nF to farad.
3. Convert the base value to µF and apply your display precision.
Understand the result before using it
Nanofarads to Microfarads converts a value measured in Nanofarads (nF) into the equivalent value in Microfarads (µF). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1e-9 ÷ 0.000001
Assumptions
- Nanofarads and Microfarads represent the same capacitance quantity.
- The input is expressed in nF; the output is expressed in µF.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 nF = 0.001 µF. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a nF measurement in a document that expects µF.
- Compare a nanofarads value with a value reported in microfarads.
- Check the nF to µF arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse nF with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Nanofarads to Microfarads?
result = input × 1e-9 ÷ 0.000001. Input is in nF; result is in µF. 1 nF = 0.001 µF. The displayed digits may be rounded.
What is 1 nF in µF?
1 nF = 0.001 µF. The displayed digits may be rounded.
Can I reverse the nF to µF conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts µF back to nF.
Is the Nanofarads to Microfarads result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.